How can i program goldcard with Card Master programmer?
Can some one help me i live in kiew.
I need it for samsung 9500 for emu.

I don't understand much Ukranian.
Thank you.

How can i program goldcard with Card Master programmer?
Can some one help me i live in kiew.
I need it for samsung 9500 for emu.

I don't understand much Ukranian.
Thank you.

http://www.freewebs.com/samodelkin/cardmaster.htm
http://rain.prohosting.com/kievsat/crd_mast/index.html

Where can i find manuals on english? or translate me this ones.

Do you know place in kiew where i can bring my pc and programator that somebody help me?

The Possibilities:

1. Programmes all types of the popular cards:

2. Has separate картоприемник for cards GSM.

3. In mode PHOENIX can be сконфигурирован on work with clockrate in 3.57 mhz , 7.15 mhz , 10.7 mhz.

(It is Important when work with GSM-card)

4. Has PonyProg-interface ( 10-ti contact connector refer to reference: http://www.lancos.com/siprogsch.html )

To him possible to connect the modules from программатора PonyProg , and accordingly programme the different microcircuits to memories and processors to serieses AVR.

5. Has a connector for work with GSM telephone on SHEATFISH-port.





Little theories.

So historically formed (on the strength of simplicity of the organizations interface ) that majority of the applied programs , not professional , support the following standards an программаторов:

- JDM

- PHOENIX

- SPI AVR

Accordingly программатор card_master works with these program , it is enough to translate him(it) in corresponding to mode.

For this it is necessary:

The Mode JDM press the extreme button , herewith fires the red led in field of indication state of working.

The Mode AVR press the button , located on greater distance from edge , herewith fires the green led.

The Mode PHOENIX wring out both buttons , herewith blazes the yellow led.

On board there is signature in field of indication state of working under these led , marking each mode.

You it is necessary to follow the picture , after text:
Установка программатора на компьютер .
Choose language of the program (Setup)


The Type of the card to choose:
- Wafer card
Load in program both files for card
Programme the card.

All.
-----------------------------------------------------

Народ , кто владеет языком - не дайте человеку "погибнуть" . :idea:

i follow the picture but i have this message:
PIC ERASE : START
>> 5:1
>> 5:2
>> 5:3
>> 5:4
>> 5:5
PIC ERASE FLASH : STOP
PIC WRITE LOADER : START
PIC WRITE FLASH : ERROR ADR[FFFFFFFF]
PIC WRITE LOADER : STOP
PIC WRITE : ERROR

What operating system?
XP or Win98 ?
If XP , that it is necessary to press button " Default WIN NT" (See drawings)
What button to press when writing in program - see the picture.
Will dart out inscription : Set mode PIC
(Press turn blue button , fires red lamp)
Will Hereinafter be a message in program:Set Mode Phoenix
(wring out turn blue button , blazes yellow)